We all dream about building what we’d like to call the ultimate street car—obscene horsepower, daily driveability, every creature comfort imaginable, show-stopping looks and undeniable track prowess. Unfortunately, few of us ever come to this reality. The fine line between street car, show car and track assassin doesn’t come easily, if ever, and those of us who started with these grandiose dreams typically end up with a car hugely lopsided toward, track, show or completely inept in any capacity. This is exactly why we brought another Nissan into our project car stable, even though we already have one, as well as an Infiniti G35.
This Z will be different, though. Instead of burning up our project car tech installments in search of power like most other projects, we’ll save you the wait. Our time attack Z already comes with power—more than we really know what to do with. As it sits right now, our Z currently sports a Nismo suspension, antiroll bars, a 1.5-way KAAZ Super LSD and a Borla exhaust. And what started out as a Vortech supercharged engine has now been replaced with a built low-compression motor fed by a Jim Wolf Technology (JWT) twin-turbo kit and valvetrain that put down more power than two non-slick tires were ever meant to hold. In our case, the JWT turbo kit is of the BB700 variety, which consists of two Garrett GT28RS turbos (better known as “Disco Potatoes”) bolted onto their standard kit. The BB stands for “ball bearing” and 700 is the amount of power this setup can make.
But having the hardware to make big power is only half the story. The impressive part of our JWT turbo kit is the way it’s managed. The fuel system has been upgraded with 555cc/min Bosch injectors, a 4:1 rising rate in-tank fuel pressure regulator (so that it retains the OEM returnless fuel design), a Walbro 255-lph high-pressure fuel pump and an oversized 3.5-inch mass air flow meter, that’s all controlled by a JWT custom-tuned ECU. This eliminates the need for any piggyback engine management and allows the car, cams and anything else that was connected to the ECU to run as if it came from the factory with this much power. That’s a power claim that few cars can boast about while still being able to start up, idle or respond as smoothly as our Z.
Project Time Attack Nissan 350Z
So just how much power are we talking about? At less than 14 psi of peak boost and on pump gas, the JWT kit puts down 548 ft-lbs of torque and 519 whp. At high boost and on race gas, that figure skyrockets to 640 whp and 653 ft-lbs of torque. If we hadn’t already hit the limits of our fuel system, MAF meter and exhaust flow, the engine and turbos could still make more power. But there is such a thing as having too much power, especially when there are only two drive wheels. Just in low boost mode, the rear tires will light up on boost through third gear. This might be fun on the street, but it will be a serious issue in tight track corners because we can’t put the power down.
As it stands, we have a really fast street car with severe traction issues. In order to make it fast, we’ll have to find some way to get more grip in the corners, in a straight line and able to survive the track, which is where this project car tech series will be all about. We’ll spend the time to properly set-up a fast car with minimal compromises to driveability or reliability and none of the excessive race parts a street car doesn’t need. To prove it, we’ve decided to throw the finished car in our Super Lap Battle time attack as a Street class contender. This means it has to have a full interior and 180 UTQG or higher tires.
By Jay Chen
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!