Modified Homepage
Facebook

Carbon-Fiber Intake And More - Mod Gear

Heat Up Your Summer Ride With Some New Parts.

Mod Gear Roar Filter
Mod Gear Classic Tube

Classic Tube
Handy Tube Diy Tube-Bending Kit
No matter what the tubing project requires, the sturdy, accurate Handy Tube bender from Classic Tube is sure to fit your needs. The swivel handle model shown here easily bends 0.25-inch OD steel or stainless steel tubing, with a radius to center of the tube of 9/16-inch. This tube bender is calibrated to show 0-degrees through 180-degrees right- or left-hand bends and features a wide hook that grips the tube securely.
classictube.com

Mod Gear Unorthodox Racing

Unorthodox Racing
GT-R 3-Piece
Pulley Set
The Unorthodox Racing pulley set only weighs 1.75 lbs, where the OEM pulleys weigh in at a staggering 8.25 lbs. This huge rotating weight reduction of 6.5 lbs is good for initial gains of 20 to 24 hp to the wheels in preliminary testing on a stock '09 GT-R. The pulleys are only available in machined bright-finished aluminum.
unorthodoxracing.com

Mod Gear Dc Sports

DC Sports
EVO X Dual
Canister After-Cat Exhaust
DC Sports has just introduced its stainless steel after-cat exhaust system for the '08-10 Mitsubishi EVO X. DC Sports exhaust systems are made from 100 percent T304 stainless steel and are TIG-welded by hand and polished to a show-quality finish. Extensive research and development has gone into the design to ensure optimum power gains with this exhaust.
dcsports.com

Mod Gear Crawford Performance

Crawford Performance
Oil/Air
Separator V2
The closed-loop Crawford Performance Air/Oil Separator is designed to keep your motor oil where it belongs - in your engine. The updated Version 2 incorporates an internal heater to equalize the temperature between the AOS and the engine and avoid condensation. Manufactured in the USA, this piece is fully TIG-welded and backed by a satisfaction guarantee.
crawfordperformance.com

Mod Gear Hks Cooler Kit

HKS
Nissan GT-R Dual
Clutch Transmission Cooler Kit
From the street to race circuits, the HKS DCT Cooler Kit for the GT-R has been developed to provide firm, positive shift engagement while assisting in the prevention of overheating the clutch and transmission. Integrated with the factory water-cooled transmission cooler, the DCT Cooler Kit also assists in reducing the GT-R's overall water temperature.
hksusa.com

Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!

*Please enter your username

*Please enter your password

*Please enter your comments
Comments:
Not Registered?Signup Here
(1024 character limit)
Modified